If your garage is facing an electrical power breakdown and you’re wondering if you can do anything about it. Rewiring your garage is easy and we will discuss the whole process below but it should be noted that it still requires appropriate skills.
The first and foremost thing of any project is to start by planning. So sketch the layout of your garage to understand and estimate the number of outlets and light fixtures that will be required. Garage Door Repair in Joliet, IL
IF YOUR ARE GOING TO WORK ON THIS PROJECT BY YOURSELF THEN IT IS IMPORTAT THAT YOU TURN OFF THE POWER SUPPLY BEFORE YOU START. YOU MUST ALSO HAVE A NON-CONTACT VOLTAGE TESTER TO CHECK EACH WIRE.
An article by the family handman.com suggests that the first thing should be a careful planning of the wiring and nailing up of electrical boxes wherever required. It states, “To run a cable from one box to another, pull cable off the coil, strip at least 8 in. of sheathing off the wires and thread the wires and about 1/2 in. of sheathing through the wire opening in the box. Untwist the cable and staple it at least every 4 ft. to the framing, all the way to the next box without cutting it to length.”
You can watch a video on YouTube for more clear guidance and visual knowledge of the procedure. If you lack the required skills or haven’t done this sort of project under the supervision of a trained professional, we will suggest that you call an expert. Familyhandyman.com suggests, “If you have aluminum wiring, don’t work on it yourself. The connections require special techniques. Call in a licensed electrician who is certified to work with it.”
If you’re looking forward to the installation of a new garage door, you will also have to keep in mind the electrical requirements of the door depending on the degree of automation and other electrical features offered by the garage. We understand your needs when it comes to the installation of garage doors and a chat with one of our qualified professional can be really helpful for making all the right decisions.